[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 14 Jul 99, at 13:25, everettb@prodigy.net wrote: > On my '63 Notch, it has a 009 dizzy on the 1500cc "S" engine. I would > like to return it to a vacuum advance distributor. I have a '66 1600cc > factory dizzy, can I use this or will differences in the advance curve, > assuming there is one, ruin my engine? The particular vacuum advance cannister must be matched to the vacuum pickoff point that your carbs use. I don't know whether the dist you have is going to work or not. Is your 1600 dist a carb dist or a FI dist that has both mech and vac adv? If it's for exactly the same carbs, then it will be fine, even if the carbs are setup slightly differently (different jets, etc.) Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/