[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Jacks


On 6 Jul 99, at 18:14, Marlin Viss wrote:

> What is the danger in jacking up under the engine?  I usually don't, but have on
> occasion with no ill effects.  I use a block of wood between the engine and the
> floor jack.

Most of the time it will be fine, especially if you use a wide piece 
of wook there, but it is just a flat cast magnesium floor with no 
internal supports across its full width. It is plenty strong enough 
to support the full weight of the engine, but I worry about lifting 
the car that way. If it gave way you'd be truly hosed.

On the late IRS years, lifting from the engine puts the rear engine 
mount hangers under compression rather than tension and I have seen 
the rubber mounts fail under this force. 

What it boils down to is that it was not designed to carry this load 
and the consequences of a failure are extreme, so why tempt fate?

Jim
-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

-----------------------------------------------------------20€T
Search old messages on the Web!  Visit http://www.vwtype3.org/list/


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]