[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Peening, means to take a sharp pointed drift and punch the side of the shank section for the gear to mash the metal against the shaft and lock it in place. As Jim says, unless your good at working on clocks and such small mechanical items I would leave it to the experts as you can break things easily and replacement parts are not avail separately. The $50 he charges is well worth it as he will lube and check everything else inside that may cause a problem. If you just get another speedo it will probably fail too..as this is a problem with a lot of them. Keith ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe