[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Are the valves adjusted at .006" or .004"? They should be .006". Still running a stock compression ratio? Rebuild? Are the cooling flaps installed? If so, are they working? Make sure they are installed and they are working! Is all the cooling tin installed and fitted well? It sounds like you have checked everything else properly. Toby Erkson air_cooled_nut@pobox.com <-- Please use this address for email '72 VW Squareback 1.6L bored and stroked to 2.0L '75 Porsche 914 1.8L, ORPCA member Portland, Oregon, http://www.geocities.com/MotorCity/8501/ > -----Original Message----- > My re-rebuild is driving me nuts!!!! I have re-timed it more than I > care to admit, adjusted the carbs, re-ajusted plugs, points and valves > and it still runs hot. The only thing not stock is the cam > (very close > to engle 110) and the exhaust ports have been freed up a bit.