T3: Fw: Turn signal

["Larry Sanford" <lsanford@pahrump.com>]

-----Original Message-----
From: Big Al <awpresley@autographica.com>
To: Type3 list <type-3@umich.edu>
Date: Thursday, March 12, 1998 12:10 AM
Subject: Re: Turn signal


>>It looks like the person before me pulled the whole arm to turn them on
(its
>>snapped right in the middle)
>>Is it replaceable, do you think?
>>Or do I have to do a creative gluing job...
>>
>>
>
>Well, you'll have to use an epoxy because no glue I've seen will hold it.
>(Remove the switch before you epoxy it or you'll have a bigger problem)
>
>Try epoxying it while you look for a new one.
>
>You are lucky it is for a Notch, all type 3's have the same turn signal
>lever (by year) except the Type 3 Ghia (a problem I was facing untill I
>found a T-3 Ghia replacement lever).
>
>So look for a T-3 up to around (I think) '65 or 66 and the same lever
>should work.
>
>Anyone with a '65 or '66 can confirm this?
>
>(I'll look up the part numbers later for you if noone confirms.)
>
>Big Al
>
>
>