[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
CarlVanT=> The problem started approx. 20 miles after reckoning
=> the carbs (full gasket set)
So, you did the carb rebuild and it was running OK for 20 miles, then
you shut it down and it wouldn't start again, or did it happen some
other way?
Now, when you crank the starter, you get no firing at all or sputtering
but no start?
Do you know whether you have fuel to both carbs yet?
=> (Haynes) is not accurate enough for my detective capabilities.
Are you saying you've found significant differences between the diagram
and your actual wiring? If so, your wiring may be improvised by the
previous owner -- kiss of death.
Steven Ayres, Prescott AZ