[T3] Horsehair

[Allen Moore <concept@compassnet.com>]

Hi All! 

  Last summer I started overhauling the front seats of my 70'
  Square.  Believe it or not, the passenger side horsehair
  pads were salvagable and in good shape.  I put a layer of 
  linen, polyesther fibre and burlap down before I put the
  pads back on to prevent the springs from ripping into the 
  horsehair.  When I completed the seat, it looked "factory
  fresh" and was very comfortable.  
  
  However, the drivers side cannot be salvaged.  I need a 
  set for the drivers side.  Even a new top or bottom may
  do.  Would anybody have one of these they would care to
  part with?  From my understanding, the same size pad was
  used from years 1970 thru 1972. 

  I DO have a pair of the foam replacements, but those are
  too soft and I really want to do it as close to original
  as possible!  Please advise. 

  

  Thanks!

  Allen Moore 
  70' Square 
  Houston, TX

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe