[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I found a source for type 3 disc brake rotors "pre-drilled" for the 911 pattern and CB's rear disc brake kit will bolt up to the type3 so it looks like this is really gonna happen. I purchased a set of 69 disc brake spindles from a listee but I still need a set of "lh and rh steering levers " these bolt to the spindles and the tie rods bolt to them. I"ll get the bearings and races and calipers and pads locally and then slap a set of rotors to 'em and go. I'm going to need a new master cylinder ? someone mentioned a 19mm dual cicuit unit ? with the dual outlet reservoir ? Thanks, Dan my65notch@aol.com http://users.aol.com/my65notch/index.htm ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe