[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 27 Aug 98, at 8:42, Park, Keith J (CRD) wrote: > Look for an engine with roughly the same HP and torque curves you want, > say the Porche 914 2.0. use its system and adjust it to match perfectly. > Namely the ECU, Press sens, dist, and injectors are larger. you may need > to swap harness and throttle switch too but it will still look stock. The pressure sensor and brain give the correct matched response to a throttle body with the correct diameter throat. I don't know, but I suspect that the 914 has a larger throat. This won't work as hoped unless you modify the T3 throat, or adapt the 914 body. I believe the T3 harness and throttle switch will work fine. Could someone out there please measure the 914 throat? The T3 throat is 40 mm. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/