Re: Dead on the Freeway

[Toby Erkson <Toby_Erkson@ccm.jf.intel.com>]

Hey Bill,
Where do you live?  I know there are three people on this list that have FI 
testers, including me.  You may live near one of us and we could use the 
tester to help.
     Toby Erkson, air_cooled_nut@pobox.com
     '72 VW Squareback 1.6L bored and stroked to 2.0L
     '75 Porsche 914 1.8L
     Portland, Oregon, http://www.geocities.com/MotorCity/8501/

______________________________ Reply Separator _________________________________
Subject: Dead on the Freeway
Author:  type-3-errors@umich.edu at SMTPGATE
Date:    10/29/97 5:43 PM


Well Jim,and the rest,in my quest for an operable car:
The FI contacts work correctly, I do get an alternate off\on reading on
my ohmeter between center and each outside pin. I pulled the electronic
module out and checked all the wires for continuity--FI trigger points
to EM--pressure sensor to EM--head sensor to EM--and any other numbered
wire that terminated at the EM. Every one of them checks out! I did pull
the pressure sensor out and check between terminals for resistance....