Re: Lessons to be learnt (long)

[Toby Basiliko <toby@gonzo.wolfenet.com>]

Or, try this one:
  The rotor slowly worked its way loose and sliced thru the walls of the
cap, effectively removing the top of the cap!  (This was a waterpumper)  
  Again, if I didn't still have (half) of the cap, I'da never have
believed it.  Now I carry a cap and rotor with the points, condenser,
and single (all-purpose) plug wire.  I keep thinking of pulling the gas
tank and mounting the spare motor, to minimise lost time when the rear
motor goes!
Toby "Yeah, Right!" Basiliko


Kenik Hassel wrote:
> 
> You think that's fun?  I had a distributor button DISINTEGRATE inside the
> distributor in the middle of nowhere.  Loctite just would not do the trick.
>  My solution is carry a complete turnkey motor on your roofrack (if you
> have one) ;).  Good advive though, brother.
> 
> kenik
>