[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
OK, I've got the mirror in my hands now. I don't see a part # anywhere on it. The only thing I see is XLO 302 on the piece that threads onto the arm for tightening. The mirror meaures 5" long and 3 1/2" tall, measured from the middle. The outside edge, away from the door, is ~4" tall and tapers to ~2" near the door. Looks just like the LH side, just slightly larger. The mirror looks to have some sort of white/grey liner around it and the mirror frame. >From the door, there is a small metal cup that covers the mounting hardware, followed by a nut (like the bottom side of the LH side), has a small arm about an inch long bending 90 deg towards the rear. The mirror shaft is then mounted perpendiculat to this arm . Make any sense ? Is this even a T3 mirror ? kevin chapman