[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Josh, since nobody else has replied your seat question, I'll give it a shot. You will want to use the regular latch to slide the seats as far forward as you can, and then there is a little latch gizmo on the inner rail, near the tunnel(at least on my '71 square) that you will need to lift with a small screwdriver to release the seat the rest of the way. If your rails are in bad condition, as mine are, a 400-Lb gorilla may be helpful, as the seat will tend to be sticky when it slides forward. I'm not sure where you can get new rails (the plastic slides), WCM didn't have them when I called, maybe Bill & Steve's might be able to get a set. Good luck! -- Jake Kooser '71 Squareback (the little girl) '66 Type 1 roadster (the project car) http://www.eurekanet.com/~jake/svvchome.htm The Southeast Ohio Vintage Volkswagen Club "Racecar spelled backwards is racecar"