[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Matey, Wiring is next to impossible to come by,however,if the ends are butchered,try crimping new connectors on the ends.You can still buy them and the crimping tool to achieve the factory look.If the wires are hard and weathered,disect wiring from another veedub(dead of course!),solder clean,fresh wires on the ends and with some heatshrink(still available as per factory) and nobody will know! As far as the rubbers go,try the Type 3 Detectives in the U.K. and they will more than likely have what you want at a price! ---------- > From: SWiels@aol.com > To: Type-3@umich.edu > Subject: Wiring, Measurments > Date: Monday, 10 February 1997 14:33 > > I was wondering if anyone bought a new complete wiring harness for the > squareback where did you get it? Thanks for the tips on the rubber but i > still want to know if anyone knows where to get rear side window seals with > chrome slot. i already have the chrome so i just need the rubber. Also if > someone could please tell me the measurements of: Rear behind back seat > width. Back seat to engine hatch. and > heighth of back seat back from behind. > > Steve Wieland > 69 Squareback