[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Clutch Pedal Assembly
I had this happen in my 67 bug. The hook broke off of the clutch pedal.
Since it is such a pain in the butt to put back on I ended up drilling
two small holes on either side of the hook on the new pedal and safety
wiring the cable in place while I attached it to the trans. This was
after having is slip of about a million times.
Jason
______________________________ Forward Header __________________________________
Subject: Clutch Pedal Assembly
Author: type-3-errors@umich.edu at SMTPGATE
Date: 4/28/97 1:59 AM
I need some help with the pedal assembly in '70 Squareback. Hopefully
someone can help. What happened: I was driving normally (mostly
mild-mannered:) when I pulled up to a stop sign & pushed in the clutch.
It was raining & my foot slipped off the pedal. The pedal SLAMMED back,
all the way down to the floor (face down)& the car died. I limped it
back home, clutchless, & discovered after initial tinkering that I could
push the pedal back up where it belonged...however, it catches on what
looks like a stopper (piece of metal bent upwards coming off the floor)
and stays at that point. When I push it up like that, I have an engaged
clutch. When it's down on the floor (it has to be "influenced" back
over the stop), I have nothing. I'm thinking that my cable is not
broken because I can see that the cable is moving at the trans (not
much, but if I mess with the pedal, I can see it at the back). I am
thinking that maybe the hook that the clutch cable slips over may have
bent or broken loose???
I either have complete engagement or nothing...no inbetween.
I am waiting to get time to take the pedal assembly out to investigate
further, hopefully within the next week. If anyone has had any
experience with this, or any thoughts before I get started, I would
greatly appreciate it.
Thanks in advance!
Topher
'70 Squareback
'68 Fastback(organ donor)
kinkos-emain@ee.net
P.S. I have the Idiot manual & the Haynes manual & neither seem to
include anything substantail on this...does the Bentley manual cover
this???