[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Rear lap belt mount
At 10:02 PM 4/15/97 -0700, you wrote:
>I am attempting to install rear lap belts in a '66 Square, and I can't
>find the outer mounting location. There is a mount for shoulder in the
>window pillar, and two mounts under the seat at the center (about 6
>inches apart). The only bolts/holes I can find to the outside under the
>seat are tucked under a steel sheet, and I think are supposed to hold
>the torsion beam onto the pan? Anyway, the hole through this steel
>sheet is too small to fit the belts metal end onto the bolt anyway.
>Anyone able to point me in the right direction?
>Peter Parker
>Portland, Oregon
Could be there is no third mounting point. My '65 Beetle also only has the
shoulder mount and the mount on the tunnel. My '71 Beetle has a third mount
low in the door pillar but was fitted with shoulder belts only.
Hanno Spoelstra <H.L.Spoelstra@WbMt.TUDelft.NL>
Bloemendaal, The Netherlands