Re: lowering you square.

[jadney@vwtype3.org (Melissa & Jim)]

>
>
>HI!
>     Raise the rear end tofactory spec with air shocks then you can adjust for
>cargo load.  Don't lower the front,  It wrecks the handeling and ride.  I 
raised
>
>Keith Park
>______________________________________________________________________________
>
>	I disagree.  The handleing is very much the same as long as you 
>lower the rear one notch when you lower the front two notches.  To get rid 
>of the rough ride remove the rubber snubbers from the front.  You might 
>bottom out metal to metal on the snubber mount when you hit large pot 
>holes.  You can either cut and reweld the mount.  Cut and don't mount the 
>snubber mount.  Don't hit really large holes.  

So you feel that the handling is unaffected as long as we ignore the lack of 
travel and the low ground clearance.  Then you don't mention bump steer.

I think there are several people out there who aren't being really 
objective.  [To be fair, I'm probably one of them.]

Jim
   ---------------------------------------------------------------------
       Melissa Kepner                                    Jim Adney
       jadney@vwtype3.org              jadney@vwtype3.org
                             Laura Kepner-Adney
                             Madison, Wisconsin
   ---------------------------------------------------------------------