[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 13 Sep 2006 at 13:09, Constantino Tobio wrote: > I've seen on some Porsche 914 forums (it uses a nearly identical AAR) > that people have been able to successfully unroll the top of the AAR can > and free up the rotary shaft. I've PB Blasted and cycled my AAR, but it > just doesn't have the range of motion it should have. I'm looking to do > this myself at this point since nothing else is working. I just put them on a battery charger and cycle them while they are oiled and I pry them up and down with a small screwdriver. Take it off the car to do this. It takes a few cycles, but if the heater is still good, this has always worked for me. It's totally non-destructive. > Does anyone have an extra electric AAR in case I botch this? Yes. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~