[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

RE: [T3] '62 engine rebuild update


I have 4 1500 flat top pistons from an old bus motor, not sure if they are
good or worn out but if your stuck I can dig them out and check anything you
'd like on them.

Keith


Top Notch Restorations
topnotch@nycap.rr.com 
71 Squareback
65 Notchback "El Baja Rojo"
65 Squareback "Eggcrate"
87 golf "Winterat"
93 RX7 "Redstur"
-----Original Message-----
From: Scott Taylor [mailto:scottbtaylor@earthlink.net] 
Sent: Saturday, September 02, 2006 12:29 AM
To: T3 List
Subject: [T3] '62 engine rebuild update

Hey everyone,

The '62 engine overhaul is going slowly but progressing. Everything I 
was worried might be too far gone turned out to be rebuildable 
including the original heads. We even decided to reuse the original 
83mm pistons and cylinders since they seemed to be fine. All was going 
well until today, when I heard from the engine builder today that one 
of the pistons has a crack in the skirt. Does anyone have happen to 
have an original 83mm 1500 piston in good condition that they can part 
with?

thanks,
Scott
62 343

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]