[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Do you have a choice of spring hole to use on the carb or on the tinware? Or maybe which way round the spring is used? Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ----- Original Message ----- From: "Keith Park" <topnotch@nycap.rr.com> To: <type3@vwtype3.org> Sent: Tuesday, June 27, 2006 1:11 AM Subject: [T3] Stock Carb linkage > Ive got a question about the stock DUAL Solex setup, > I had this problem with the Notch and finally noodled it out but the Crate > setup which is complete with the original springs has the same issue. When > you open the throttle fully it sticks open, the left carb on the crate will > lodge in the fully open position. What happens is that the lever passes > over the straight position and back the other way so the spring actually > starts to hold the throttle lever open rather than trying to close it. The > right carb seems OK. What do I have connected or adjusted wrong? Is this a > quirk with these setups? Nothing seems to be binding and both carbs are > fresh rebuilds. > > Thanks for any help, > > Keith ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~