[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-flowed>I've uploaded a composite image after I brushed the connectors on the fuel sender.
The hot side has a steel rivet through the cap from the brass male connector end that squeezes a brass washer that connects to the resistance wire and underneath that is a steel washer. There is no electrical connection between the male connector and the brass washer currently as there should be or between any of the pieces of this stack of components.
If I solder the steel rivet end to the brass washer and the other end of the steel rivet to the brass male connector all should be well on that end. Confirmation? Different ideas?
I was thinking of doing what Russ mentioned and solder a wire to the brass spring on the grounding end. Thanks for the confirmation of that idea.
Jeff '67 Sqbk
-- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.9.9/382 - Release Date: 7/4/06
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:email@example.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~