[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] AAR Resolved, and some questions about idle.


On 28 Feb 2006 at 17:14, Constantino Tobio wrote:

> My AAR registers 13-14 ohms, and it does get warm to the touch, though
> not particularly hot. Judging from the pictures there's not much to the
> internal coil. It could still be binding and it just needs a whole bunch
> of heat cycles to get nice and loose. It could also work a lot better on
> an actual warm engine with the lid on, not an engine that's been idling
> for 20 minutes in my 25 degree garage. :)

I had 2 AT AARS here, so I measured them and they are 14 and 15.3 
Ohms. They respond to the combined temp of their heater and the 
engine, so I suspect that they are working just as they should, or 
they may free up a bit more with a bit more use. I think you've got 
it licked.  

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]