Re: [T3] Restoring Floors

["Gary Gamboa" <gary_gamboa@hotmail.com>]

<x-flowed>>If you get water there you've got other problems, so those are the
> problems you should fix.

I already fixed my airbox leaks. There was only surface rust/pitting on the 
passenger side, the origin of this water was the ECU seal, which water 
flowed onto the rear deck, then down into the battery area, and through or 
under the divider between the rear and front seat area. The seal was 
replaced and no water is coming in anymore.

My heater channels have rust holes, I'm assuming this could be a source of 
water. Maybe I should only prepare the floors, put down a coat of POR15, 
then wait until I have the rockers repaired/replaced.

> adhesive ...the panels back in place

My panels were scraped up piece by piece, they cannot be reused.


Gary


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>