[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Easily. Use any small screw and nut you have, preferably one with a csk head. I assume you have a welder. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ----- Original Message ----- From: "Mike Fisher" <fisherfarms@uwol.net> To: <type3@vwtype3.org> Sent: Sunday, August 06, 2006 9:26 PM Subject: [T3] Radius Arm > I've been trying to get the round access plate loose so I don't have to pull > my rear fender. The stud is turning with the 8mm nut. I thought about > grinding the nut off but I will probably ruin the stud anyway. Could I weld > a new stud to this access plate after grinding it off? Mike Fisher > Harrisburg, OR > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > >