[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[New Search]
[T3] Radius Arm
<x-flowed>I've been trying to get the round access plate loose so I don't have to pull
my rear fender. The stud is turning with the 8mm nut. I thought about
grinding the nut off but I will probably ruin the stud anyway. Could I weld
a new stud to this access plate after grinding it off? Mike Fisher
Harrisburg, OR
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[New Search]