[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] oil cooler gap/seal photos


<x-flowed>At 07:50 AM 9/14/2005, Jim Adney wrote:
On 13 Sep 2005 at 22:10, David Y wrote:
> I took these photos of the side of the installed oil cooler/seal using a
> small pen mirror. Does this look like the proper gap/seal?
> http://dcr.csusb.edu/dny/oil_cooler_seal_installed.jpg
> http://dcr.csusb.edu/dny/oil_cooler_seal_installed-2.jpg

It's really hard to tell, but IF this is a '68 case AND cooler, then I don't
think this is done right.
The '68 case would be a single oil pressure relief case.

The case is brand new, and has both the oil pressure relief valve and the oil pressure control valve, so I believe this makes it a post-1970 case style (?)


Also, the oil cooler has no visible numbers/markings next to the oil pressure switch.

Does that help?

As always, a big THANKS!

Dave Y.
68 Square



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]