[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Tue, 2005-09-13 at 19:12, Russ Wolfe wrote: > On Tue, 2005-09-13 at 18:53, The Canadian wrote: > > Does anyone know the spec for the float height in a 32 PDSIT? > > > I should have it on my web site, someplace. > http://classicvw.org/gallery/carbs/carb_jets?full=1 > notice that they spec the washer thickness under the needle valve. that > is how you adjust the float height. Not bending the float arm. It has > been found lately, that the needle valves that are in the carb kits are > junk. Just found this also. http://classicvw.org/gallery/carbs/t_3carb1?full=1 There is a t-2 carb section also for the 34 pdsit's -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~