[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[New Search]
Re: [T3] spoke too soon (tin!)
At 07:31 AM 9/12/2005, you wrote:
=> Could somebody explain the
procedure for setting the advance at max 32?
Set the dial on the light to 32, and turn the distributor until the TDC
mark appears to be at zero. (With an 009 you should get full advance much
earlier than 3500rpm, btw.)
Thanks! The TDC mark is a bit erratic at the RPM at which the advance
maxes out, but I set it to 30 to allow for the slop. Is this an issue
with 009s only or is this the same with the vac adv.?
Thanks again,
Dave Y.
68 Sqbk
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[New Search]