[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] PA safety inspection - Speedometer


<x-flowed>This is an early indication that the cable needs
to be lubricated. The lube has dried out and
binds the cable just a bit causing it to start-stop
at low speeds, at high speeds it rotates fine as
it's past the friction-stop point.

Failure to fix this will result in a broken cable.

Other's may chime in with the fix, I can't rememer
what I've done in the past, but I've tried various
methods.

Jeff '67 Sqbk

Eric Helton wrote:

7) Speedometer - fluctuates a lot at low speeds, but
is fine over about 30 with no fluctuations. This
might be a marginal item if it were the only problem.





-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.19/93 - Release Date: 9/8/05

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]