[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] "Heater"


I found that the copper ultra RTV does hold up to the heat at these joints.
I did mine in the spring and they held up fine this time.  Id use it with
new donut kits to seal them.

Keith


> connect to the muffler. Leaks there will spray exhaust forwards, where it
can
> squirt inside the heat exchanger and join with the heated air.
>
> This can be difficult to fix, but you have at least 2 options: Seal the HE
to
> muffler connection, or seal the sheet metal to exhaust pipe joint at the
rear
> of the HE. Or you can try both.
>
> -- 
> Jim Adney


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]