Re: [T3] addendum to vapor lock question

[David Y <goob@adelphia.net>]

At 04:17 PM 11/20/2005, Jim wrote:
> Early pumps were put together with
> screws and could be taken apart. I 
> don't see any on yours, so my guess is that it's just crimped 
> together and not disassembleable. You could try blowing solvent thru
> it in the forward direction, but this will be hard to
> do.

The Haynes manual shows a photo of this exact pump (the Brosol I think)
with the top section removed, but doesn't explain how the feat is
accomplished. I'll pull it off and see if there are any screws, or if
perhaps the top section is itself threaded and screwed on (?)

Dave Y.
68 sqbk



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~