[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Windshield Squirter Nozzle


***It's got a springy bit of plastic on the left side (left is as seen from
the
driving seat) and a notch on the other.  Push the nozzle to one side and
tilt
the other side up. You won't get a finger to the back of it unless you
remove the airbox, certainly
on the long-nose models.
warm the area with a hair dryer for a while to soften the plastic and reduce
the chance of it splitting.
Photo on its way, David.***


Thank You to all!...Got It!
mine was slightly crooked on the cowl and I didn't wanna pull or twist
without knowing what I was up against....after seeing the picture Dave was
kind enough to send me, I saw EXACTLY how this thing was
attached.........mine came out quite nicely from the top side (hair dryer
trick assisted), but after seeing the fluid hose that came from it, I'll be
tearing out the fresh air box when it comes time to re-install (with new
hose) anyway.
Thanx Again, all!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]