[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
or go 4 times the 7.5 degree mark and you will be fine too! > > From: "Dave Hall" <dave@hallvw.clara.co.uk> > Date: 2005/11/09 Wed PM 03:47:59 EST > To: <type3@vwtype3.org> > Subject: Re: [T3] 009 timing measurement > > > This is measured round the max circumference of a T3 pulley starting at the > centre of the TDC notch, which on my original '64 pulley is a smooth curved > notch. The other timing marks on my '64 pulley are 3 'T shaped' grooves cast in > it just over half an inch to the right. The left hand one is 7.5 degrees, the > second is 10 degrees and the third is 12.5 degrees. > > > > If you just go 3 times the distance from TDC to 10 degrees BTDC, you get 30 > degrees BTDC. Mark this and never set the timing more than that! > > Dave. > UK VW Type 3 & 4 Club > http://www.hallvw.clara.co.uk/ > ------ > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Brian Fye-- http://www.geocities.com/menacefye 64 Notchback, 64 Notch Speedster, 67 Squareback, 73 Squareback, 73 412 Squareback Automatic, 74 412 Squareback Automatic, Wedgechop Drag Bug