[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

[T3] 64 only dizzy


<x-flowed>
Subject:
Re: [T3] 009 timing measurement
From:
Jim Adney <jadney@vwtype3.org>
Date:
Wed, 09 Nov 2005 08:53:13 -0600

To:
type3@vwtype3.org


On 9 Nov 2005 at 8:59, Chris Wright wrote:


"It works out to be 0.071 inch per degree. So 30 degrees is about 2.1
inches. 32 degrees would be almost 2.3 inches".



Thanks for saving that measurement. This question comes up often enough that someone needs to commit it to memory.


My car is now happily (at last) running on the original 64 only
ZV/JCU4R3 distributor that Russ was recommending. And Russ, following
your info, I was able to order the correct dizzy cap new from a Bosch
agent. How cool is that after 41 years!



Very cool indeed. Bosch is very good about this. There can't be many of THOSE distributors around; was this same cap used on other distributors?


Not as far as the listing says which makes it pretty remarkable to get a nice shiny new one from Bosch with no hassle.
It takes a standard rotor but the cap unique.

--

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]