[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Distributor plates....


On Tue, 2005-11-08 at 20:07, phil cain wrote:
> There is grease between the plates, yours need
> cleaning and new grease put between them so they can
> slide like silk over the rub points. I take my
> distrubtors apart and clean them with carb cleaner(in
> the bucket)then wash and dry them, then oil and lube
> them. they work like new.   Phil
> 
Just don't lose the ball bearing if you take it apart. And use a very
light grease between the 2 plates.

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
'05 KIA Sorento SUV
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]