[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[New Search]
Re: Governor o-ring (was:Re: [T3] Passed test - good and bad news)
<x-flowed windows-1255>Thanks Russ,
I can see two interesting things in your pictures. First of all the bevel
goes towards the governer. Is part of it inside the end of the governor
shaft - should I knock it or press it in a bit? Also, the shaft of the drive
pinion sticks out of the sleeve further than I thought. If I press mine in
the whole way then only a little bit of it is visible. Obviously it is not
supposed to go the whole way in.
Could you measure how much of the pinion sticks out of the end of the
sleeve?
The whole thing is obviously very worn and loose. Would this have affected
its operation when it was in use?
Thanks,
Daniel
> Thanks. I'd appreciate it, if it's not too much trouble.
>
Here they are:
http://classicvw.org/gallery/governor
I am not a professional photographer.
;=}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[New Search]