[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sat, 2005-05-28 at 14:41, Daniel Baum wrote: > > OK, I'll try that. The sleeve has a bevel at one end; does that go towards > the governor or into the tranny case? I think the bevel goes towards the tranny. To help it into the seal. > > > I you want, I can go pull the one from my parts trans and get a picture > > of it for you. > > > > Thanks. I'd appreciate it, if it's not too much trouble. > > BTW, I realised today that it is most likely the lug bolt that is stripped, > not the hub. Does the Beetle use the same bolts? I actually don't think I > have any spare ones. They should be the same in your case if it is a 4 bolt wheel. I will go out in a minute and photo my govenor <sp>. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~