[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 20 May 2005, at 19:13, Toby Erkson wrote: > I bought a pressure gauge (0-60psi, +/- 3%/2%/3%) and gotta get the > right hose and fittings for it so I can check fuel pressure. The > Bentley wasn't clear on how to attach the fuel pressure tester. After > removing the cap (bolt?) does the gauge hose screw on to the fuel line > tap or does it require a hose clamp to keep the hose attached? And > what size hose should I use? Just push the 5/16" hose onto the stump where you removed the screw. I don't bother with any kind of clamp for this temporary connection. When you are done you may need a new sealing washer for under the screw head. The original Alum washer will probably crumble. I replace them with nylon washers. - Jim Adney Madison, WI USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~