[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>>>can it be fixed?<<< My square has been sitting for 11 years and the gauge didn't work because of varnish in the sender tube / float. I removed the assembly from the tank and soaked it upright in kerosene for days...I would go to it everyday and pull it out of the solvent and let it drain, then reinsert and let it fill back up again....did this a bunch of times to flush it out.....This worked well for me and my gauge seems to be working good.....this also allowed me access to see down into the tank, right where the fuel lines exit and enter the tank so I could flush out the tank as well and do a visual till clean!......sounds like you will be flushing out your tank as well...... Dave Pallo Hers: '72 Square (in process) His: '96 Impala SS....Sunny Sunday's only ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~