[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] stuck gas gauge


On 29 Mar 2005 at 9:15, hisham bakr wrote:

> Went to get some gas, gauge was at 1/4, put in 6 gals and drove off, still
> at 1/4, drove 50 miles, still at 1/4. I already checked the sending unit
> wire connection and it looks fine. Would that be a grounding problem or
> sending unit problem? can iy be fixed?

It can almost certainly be fixed. The problem is probably inside the sender, 
but you can test this by getting a friend to watch the gauge while you play 
with the sender wire. The gauge should read full when you ground the sender 
wire and empty when you disconnect it from everything.

You can take out the sender and open it up. It sounds like the float is stuck. 
You probably just need to clean it out.

Unfortunately, this probably means that your tank is full of mud and water. You 
probably have bigger problems, most likely related to a broken overflow hose.
You're about to discover why it's important to fix this.

-- 
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]