Re: [T3] Head compatability

["ibjack" <proformance2@cox.net>]

<x-flowed>So would it be best to replace both sides, so that they match?
----- Original Message ----- 
From: "Russ Wolfe" <russw@classicvw.org>
To: "Type3" <type3@vwtype3.org>
Sent: Monday, March 21, 2005 7:02 PM
Subject: Re: [T3] Head compatability


> On Mon, 2005-03-21 at 20:09, ibjack wrote:
> > I need to replace the head on my back up motor.  The replacement is a 211
> > head and the others are 311.  Will there be any problems by doing this?
> a 211 head has smaller valves. They are in between 40hp T-1 and the
> Valves in a 311 head.
> I have a couple of the 211 heads. Let me know.
>
> --
> Russ Wolfe
> '71 FB AT
> '66 FB MT
> '64 T34 (not running)
> '65 T1 (not running)
> '05 KIA Sorento SUV
> russw@classicvw.org
> http://www.classicvw.org
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>