[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sat, 2005-03-19 at 01:52, Craig Webb wrote: > >The Bentley manual gives the dimensions and shows how to do it. An > >adjustable protractor level is a good investment for this operation. I > >have the one that is shown in the manual, but one from Sears or Harbor > >Freight will do the same thing, just not as conveniently. > > Russ, thanks for the reply. I used the Bentley to set it up as accurately > as I could. Something is amiss though. I was looking for some basic > wheelarch dims to help me in troubleshooting which corner is responsible. > None of my manuals give those dimensions that I can find. They do go into depth on setting the spring plates and torsion bars using the door sills as a reference point. But this is with the factory angle finder. VW-261. I have one of these that I do loan out, but I require a substantial deposit to ensure its return. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~