[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2005-03-18 at 15:51, Craig Webb wrote: > Hi, can someone help me out with some dimensions please. I would like to > know the height from ground level to the highest point of the wheel > arches/fenders for the front and rear (IRS squareback, unladen). > > I took all my axles to bits when I restored the car. Now that its all back > together again, I've got a lopsided lean. I guess one of the torsion > splines is off, but its hard to tell if it's the front or rear. The dims > will hopefully help me to work out which corner to start fiddling with! > The Bentley manual gives the dimensions and shows how to do it. An adjustable protractor level is a good investment for this operation. I have the one that is shown in the manual, but one from Sears or Harbor Freight will do the same thing, just not as conveniently. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~