[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>>>My '71 only has one wire coming out of that point. If you follow that leg of the harness tho, where it joins the main injection harness, is where the fuel pump control wire joins the harness going to the front of the car. Can you find that wire in the connector at the ECU?? <<< Yep, I have that wire where you say going to the pump control. It's probably a '72 thing to have this additional white wire coming out with the sensor wire...I did a continuity check, and it doesn't run back to the brain's plug.......I dunno what it's for, but the wire does lay down right where there is a male spade plug bolted down to block ground...... Is there anybody reading this has a '72 and can tell me if they have this wire ((( Out of this branch of the harness, I have the 3 wires that go to the trigger contacts....and 2 more white wires.....these two wires were crimped together into one electrical connector and plugged into a ground spade.......given what you said, I just cut them off the connector and one at a time did the continuity test and found which one is terminal #23 at the brain. I'm assuming that my other white wire actually does go to the grounding spade? (it's on a breather box mounting bolt).))) and what is it attached to??? Dave Pallo Hers: '72 Square (in process) His: '96 Impala SS....Sunny Sunday's only ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~