[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] temp sensor wire location


On Thu, 2005-03-10 at 22:16, Dave Pallo wrote:
> >I just went out and looked at the harness on my '71. the head temp sensor 
> wire comes out of the injection harness on the same branch as the three 
> wire trigger point connector. About 3"-4" up the harness from the 
> distributor. <
> Awesome!.....Thank You very much, Russ!!
> Out of this branch of the harness, I have the 3 wires that go to the 
> trigger contacts....and 2 more white wires.....these two wires were crimped 
> together into one electrical connector and plugged into a ground 
> spade.......given what you said, I just cut them off the connector and one 
> at a time did the continuity test and found which one is terminal #23 at 
> the brain!......Thank You!
> I'm assuming that my other white wire actually does go to the grounding 
> spade? (it's on a breather box mounting bolt)  Do you have that same wire 
> too?
> 
> 
My '71 only has one wire coming out of that point. If you follow that
leg of the harness tho, where it joins the main injection harness, is
where the fuel pump control wire joins the harness going to the front of
the car.
Can you find that wire in the connector at the ECU??
I only see one ground on the wiring diagram and that is a 3 prong on the
engine block.
http://classicvw.org/gallery/partsbook/70_72FI

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
'05 KIA Sorento SUV
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]