[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>I just went out and looked at the harness on my '71. the head temp sensor wire comes out of the injection harness on the same branch as the three wire trigger point connector. About 3"-4" up the harness from the distributor. < Awesome!.....Thank You very much, Russ!! Out of this branch of the harness, I have the 3 wires that go to the trigger contacts....and 2 more white wires.....these two wires were crimped together into one electrical connector and plugged into a ground spade.......given what you said, I just cut them off the connector and one at a time did the continuity test and found which one is terminal #23 at the brain!......Thank You! I'm assuming that my other white wire actually does go to the grounding spade? (it's on a breather box mounting bolt) Do you have that same wire too? Dave Pallo Hers: '72 Square (in process) His: '96 Impala SS....Sunny Sunday's only ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~