[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Out with the old, in with the new (some assembly required, welder not included).


<x-flowed>Jim Jim Jim, where have you been? My baby (Darksider) is on her 4th engine, thus the 2.0L in my sig ;-) Here's her birth certificate:
http://www.icbm.org/erkson/personal/birth_certificate.jpg
Now she's using a CB Performance case breather with [my custom] hoses going to the right carb:
http://www.icbm.org/erkson/personal/engine-2005.jpg


She originally had the two plastic plugs (as Lightsider does, too) so she could've had the breather heads. When my parents had her rebuilt the heads didn't have the hoses so the engine builder likely left them off since the heads didn't have the fittings. It was a Type I predominate shop out in the country so that would sound right.

   Toby Erkson  --  air_cooled_nut@pobox.com
   '72 VW Squareback Darksider, 5-speed, 2.0L, rag top
   '72 VW Squareback Lightsider, automatic, FI, sunroof, gas heater
   '95 VW Jetta ~ SCCA Solo II; '73 Porsche 914; '81 Honda Gold Wing
   http://www.icbm.org/
   Portland, Oregon


Jim Adney wrote:

Does or does not have breather heads? What's the engine number?
If it has the breather box with 2 plastic plugs then it should have the breather heads.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]