[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

RE: [T3] Painting Front Beam

DSCF0046.JPG looks like the side I need, but there's mud all over the bits
I'm looking for ;)  The opposite side confirmed I'm not missing a retainer
there though, so that helps!
I'm going to see if my friend with a 71 square can take some pics of his

63 sunroof notch with 70 pan
72 914 

-----Original Message-----
From: Russ Wolfe [mailto:russw@classicvw.org] 
Sent: Friday, June 03, 2005 3:21 PM
To: Type3
Subject: RE: [T3] Painting Front Beam

On Fri, 2005-06-03 at 17:11, Carrie wrote:
> Actually, I would love that.  I have one more issue with this beam and 
> the
> '69 is what I need to see (split year front end 68/69, yes, this is 
> Frankencar).
> On the bottom torsion/trailing arms on both sides the stabilizer 
> bar(s) are held in with grub screws and some kind of retainer cap.
> On the top there is a grub screw on the drivers side (per the workshop
> manual) and a smaller threaded hole where I would expect to see a grub 
> screw on the passenger side.  It looks like a short bolt goes in 
> there, (per the workshop manual) but I'm not clear on what holds the 
> stabilizer bar in place on either end on top.  It looks like I'm 
> missing retainer clips/plugs or something else.
See if there is anything there that helps.
If you need more, I can go get mor pictures.
I took those because someone was interested in buying it.
You might say that is a virgin '69. Never been touched, until I started
pulling it.

Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
'05 KIA Sorento SUV

List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]