[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 27 Jul 2005 at 20:04, type3weezer@comcast.net wrote: > Ihave the cylinder hone, it's the rebuild kit I would have to dig for. > I'm finding that this is a tough year to get parts for. I'm looking at > my Bently right now,which tells me that I have a newer reinforced > brake system. In the B-4 section page 6 is a picture of my brakes. > Without taking it apart, should I assume that I have the "new master > cylinder" (dia.19.05mm)? Is there another model with this size that I > can use? Where should I start digging? Maybe a FLAPs? This is driving > me nuts. Which Bentley is this? If you can get to where you can see the MC, there should be some useful letters/numbers cast into the side of it. There should be a brand, which should be either FAG or ATe, and there should be a number which should be 19, 20, or 22, which is the diameter to the nearest mm (oddly, the actual dia is some even fractional inch.) Sometimes there is also an extra meaningless number which might look like one of the above, but just serves to confuse things. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~