[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Gettin started on the Crate!


On 2 Jul 2005 at 21:43, Keith Park wrote:

> Its a steel gasketed one.  I pulled the Clutch and it was shot...
> which goes along with it being a delivery vehicle but the flywheel is
> also bit compromised from the rivits so between that and the bad teeth
> I think I need to put another flywheel on it. 

It's probably an easy part to find replacements for.

Some undercutting in the flywheel really won't cause any big problems, so if 
the teeth are acceptable, it may be fine if you just get it smoothed out so 
that there are no high spots.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]